Heating cable for semi-storage heating

						
Heating cables in a layer of thermally conductive material (anhydrite, concrete…). They are easy to install, even in surfaces with a complicated shape. They are particularly suitable for use as main heating systems.
Heating cable for semi-storage heating
Heating cable for semi-storage heating

One of the advantages of this system is the lower acquisition cost of the heating cables – as the cable is placed in a sufficiently thick layer to ensure an even distribution of temperature, cables with higher linear wattage can be used (approx. 15 W/m), and so a shorter length with larger spacing is needed for the installation of the required wattage than if the cable had only 10 W/m. Also, PVC sheathed cables are used, which are cheaper than cables with Teflon-based sheaths. The cable does have a larger diameter, but it doesn´t matter in any way in this type of structure. The disadvantage of heating cables is that they are more complicated to lay – mainly in situations when the heating cable is supposed to be inside the load-bearing slab. This slab must be monolithic; if a layer of only 2cm were poured in the case of e.g. concrete, a heating cable was installed after the initial layer had set and subsequently a second layer with a thickness of 4cm was poured, there would be a very real danger that these two layers would separate after the commissioning of the heating cable and the floor would “rise”. In the case of semi-storage and storage systems, it is also necessary to strictly follow the gradual start-up procedure for raising the floor temperature – the so-called first heating mode.

For semi-storage heating, we offer cable circuits with protective braiding (PSV, ADSV+ and ADPSV) with a linear wattage of up to 18W/m.

Heating cable for semi-storage heating
Floor construction – Semi-storage system
ADSV+  Cable construction
ADPSV Cable construction
PSV Cable construction
Heating cable for semi-storage heating

ADSV+ 10 W/m

Type ADSV+ 10 W/m Output Length Cat. No.
[W] [m]
ADSV+ 10120 120 11.4 2253000
ADSV+ 10200 200 18.9 2253005
ADSV+ 10250 250 23.6 2253010
ADSV+ 10320 320 31.6 2253015
ADSV+ 10400 400 36.9 2253020
ADSV+ 10450 450 45.9 2253025
ADSV+ 10520 520 49.6 2253030
ADSV+ 10600 600 63.9 2253035
ADSV+ 10750 750 75.8 2253040
ADSV+ 10950 950 87.0 2253045
ADSV+ 101100 1100 114.5 2253050
ADSV+ 101300 1300 131.3 2253055
ADSV+ 101700 1700 158.5 2253060
ADSV+ 102000 2000 194.5 2253065

ADSV+ 18 W/m

Type ADSV+ 18 W/m Output Length Cat. No.
[W] [m]
ADSV+ 18160 160 8.5 2253100
ADSV+ 18260 260 14.5 2253105
ADSV+ 18320 320 18.5 2253110
ADSV+ 18420 420 24.0 2253115
ADSV+ 18520 520 28.4 2253120
ADSV+ 18600 600 34.4 2253125
ADSV+ 18680 680 37.9 2253130
ADSV+ 18830 830 46.1 2253135
ADSV+ 181000 1000 57.5 2253140
ADSV+ 181200 1200 68.9 2253145
ADSV+ 181500 1500 83.2 2253150
ADSV+ 181700 1700 100.4 2253155
ADSV+ 182200 2200 122.7 2253160
ADSV+ 182600 2600 149.6 2253165

ADPSV 10 W/m

Type ADPSV 10 W/m Output Length Cat. No.
[W] [m]
ADPSV 10120 120 11.4 2256010
ADPSV 10200 200 18.9 2256015
ADPSV 10250 250 23.6 2256020
ADPSV 10320 320 31.6 2256025
ADPSV 10400 400 36.9 2256030
ADPSV 10450 450 45.9 2256035
ADPSV 10550 550 56.1 2256040
ADPSV 10600 600 63.9 2256045
ADPSV 10750 750 75.8 2256050
ADPSV 10950 950 87.0 2256055
ADPSV 101100 1100 114.5 2256060
ADPSV 101300 1300 131.3 2256065
ADPSV 101700 1700 158.5 2256070
ADPSV 102000 2000 194.5 2256075

PSV 10 W/m

Type PSV 10 W/m Output Length Cat. No.
[W] [m]
PSV 10170 170 16.1 2320020
PSV 10280 280 28.0 2320025
PSV 10350 350 34.0 2320030
PSV 10450 450 46.0 2320035
PSV 10550 550 53.7 2320040
PSV 10640 640 64.4 2320045
PSV 10720 720 71.7 2320050
PSV 10800 800 79.1 2320055
PSV 10870 870 88.0 2320060
PSV 10960 960 100.0 2320065
PSV 101100 1100 106.8 2320070
PSV 101280 1280 129.6 2320075
PSV 101600 1600 157.9 2320080
PSV 101900 1900 189.6 2320085
PSV 102500 2500 234.7 2320090
PSV 103000 3000 277.8 2320095

PSV 15 W/m

Type PSV 15 W/m Output Length Cat. No.
[W] [m]
PSV 15200 200 13.7 2320110
PSV 15340 340 22.2 2320115
PSV 15420 420 28.1 2320120
PSV 15550 550 36.7 2320125
PSV 15660 660 44.7 2320130
PSV 15800 800 52.3 2320135
PSV 15880 880 58.6 2320140
PSV 15960 960 64.1 2320145
PSV 151070 1070 71.5 2320150
PSV 151210 1210 81.0 2320155
PSV 151300 1300 84.1 2320160
PSV 151580 1580 104.6 2320165
PSV 151900 1900 128.6 2320170
PSV 152200 2200 150.3 2320175
PSV 152800 2800 189.4 2320180
PSV 153400 3400 227.5 2320185

ECOFLOOR accesories

Type Description Quantity supplied Cat. No.
Gutter clip 100 1 package = 25 pcs 1 package 2350000
Gutter clip 150 1 package = 25 pcs 1 package 2350007
Downpipe cable clip 1 package = 25 pcs 1 package 2350003
Chain 1 package = 10 m 1 package 2350004
Grufast 1 unit = 10 m / 4.5 m2 1 unit 4200013
Cable Fix 1 unit = 10 m 1 unit 4200016
Copper end piece intended as an end piece for a flexible tube ('gooseneck'): outer diameter 11.4 mm / inner diameter 8.5mm – used to prevent sealant (anhydrite, concrete) from entering the gooseneck containing the floor probe and to improve the transfer of heat to the thermistor of the probe = more precise measurement of floor temperatures 1 unit 2350021
Raster separation film 1 unit = 50 m 1 unit 6651032
Plastic cable clip 1 package = 600 pcs 1 package 1200003
Plastic clip 1 package = 50 pcs 1 package 1200000
Installation tool for the comfortable installation of plastic clips 1 unit 1200010
T-strip 1 package = 20 pcs 1 package 2350009
Kit no. 1 for PV cable repair 1 kit 5030121
Kit no. 2 for ADSV, ASL1P, PSV, CM Mat LD and LDTS cable repair 1 kit 5030122
Kit no. 3 for MADPSP, MAPSV, MST, MDT and ADPSV cable and mat repair 1 kit 5030123
Kit no. 4 for connection and termination of self-limiting cables 1 kit 5030124
Kit no. 5 for MADPSP installed under asphalt 1 kit 5030125
Kit no. 6 termination of PC/PC-S cables 1 kit 5030126
Aluminium tape width 50 mm, length 50 m 1 pcs 2832515
SYFOK-P 1 package = 20 m 1 package 2350012
1 package = 10 m 1 package 2350013
Spacing grip 1 package = 25 pcs 1 package 2350014
C-shaped copper 1 package = 25 pcs 1 package 2350005
TOPlist