Socket WiFi thermostat

The thermostat controls the connected appliance according to the set program, the air temperature is sensed by a short cable probe. The probe is brought down to the bottom edge of the thermostat on the side where it will be least affected by the heat source. The package also includes a self-adhesive clip to fix the probe cable.

The thermostat cannot be controlled locally, a WiFi internet connection is required to set or modify the program. Once programmed, the thermostat works even without a mains connection. In the event of a power failure, the time settings are retained for up to 24 hours, during which time no time update from the internet is required for full recovery of functions.

The thermostat can also be operated only in the "On/Off" mode, in which it does not sense the temperature but switches the power output according to the set time program. Only in this mode the button on the front of the product is functional, allowing the power contact to be switched on/off manually. In temperature sensing mode, the button is not active.

To control the socket thermostats, the mobile app is available for Android and iOs. After creating a user account and setting up the thermostat via the mobile app, thermostats can also be controlled from a computer or laptop via the web interface.

Basic properties:

• Selectable heating and cooling mode (reverse switching logic when the set temperature is reached)
• Two operating modes,"Manual" (user intervention required to change) and "Auto" (the appliance is controlled according to the program)
• "Frost protection", "Open window" and "Energy calculation" functions
• In "Auto" mode, up to 16 changes can be set for each day, and in temperature control, each change can be set to any value (0.5 °C increments)
• Operating temperature 0 to 40 °C (measurable temperature range -20 to +75 °C)
• Integrated 2.4-2.5 GHz WiFi module